ユーザ用ツール

サイト用ツール


Action disabled: backlink
mruby

mruby

since 2017-05-13

文献

まつもとゆきひろ直伝 組込Ruby「mruby」のすべて 総集編

mruby-esp32

Ubuntu 17.04

micropython で使った ESP 32 開発ボード。

$ cat setup.sh 
export PATH=$PATH:/home/nishimotz/esp/xtensa-esp32-elf/bin
export IDF_PATH=/home/nishimotz/esp/mruby/esp-idf
$ cat picocom.sh 
echo Press Ctrl+A Ctrl+X to quit
sudo picocom --baud 115200 /dev/ttyUSB0

http://dsas.blog.klab.org/archives/mruby-on-esp32

https://github.com/mruby-esp32/mruby-esp32

https://github.com/mruby-esp32/mruby-esp32-app-mirb

https://github.com/iij/mruby-pack

https://github.com/mruby-esp32/mruby-io → make できない

https://github.com/mruby-esp32/mruby-socket → increase stack size の説明あり 書いてある通りに 32768 にする

diff --git a/components/mruby/build_config.rb b/components/mruby/build_config.rb
index 2c3d17c..1b65d34 100644
--- a/components/mruby/build_config.rb
+++ b/components/mruby/build_config.rb
@@ -77,5 +77,8 @@ MRuby::CrossBuild.new('esp32') do |conf|
   conf.gem :core => "mruby-compiler"
   conf.gem :core => "mruby-kernel-ext"
   conf.gem :core => "mruby-class-ext"
+  conf.gem :github => 'iij/mruby-pack'
+  conf.gem :path => "/home/nishimotz/esp/mruby/mruby-esp32/components/mruby_component/mruby-esp32-system"
+  conf.gem :path => "/home/nishimotz/esp/mruby/mruby-esp32/components/mruby_component/mruby-esp32-wifi"
 
 end
diff --git a/main/main.c b/main/main.c
index 86fbf3e..a27abbb 100644
--- a/main/main.c
+++ b/main/main.c
@@ -137,5 +137,5 @@ mirb_task(void *pvParameter)
 void
 app_main()
 {
-  xTaskCreate(&mirb_task, "mirb_task", 8192, NULL, 5, NULL);
+  xTaskCreate(&mirb_task, "mirb_task", 32768, NULL, 5, NULL);
 }
# スタックを増やす前
> ESP32::System.available_memory 
 => 123928

# スタックを増やした後
> ESP32::System.available_memory 
 => 41088
Terminal ready

 => nil
> wifi = ESP32::WiFi.new
 => #<ESP32::WiFi:0x3ffe3dcc>
> wifi.on_connected do |ip| puts "Connected #{ip}" end
 => #<ESP32::WiFi:0x3ffe3dcc @on_connected_blk=#<Proc:0x3ffe3de4@(mirb):3>>
> wifi.on_disconnected do |ip| puts "Disconnected #{ip}" end
 => #<ESP32::WiFi:0x3ffe3dcc @on_connected_blk=#<Proc:0x3ffe3de4@(mirb):3>, @on_disconnected_blk=#<Proc:0x3ffe3db4@(mirb):4>>
> wifi.connect('(acccess point name)', '(passphrase)')
I (389995) wifi: wifi firmware version: 6c86a1c
I (389995) wifi: config NVS flash: enabled
I (389995) wifi: config nano formating: disabled
I (389995) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (390005) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (390025) wifi: Init dynamic tx buffer num: 32
I (390025) wifi: Init dynamic rx buffer num: 64
I (390025) wifi: wifi driver task: 3ffed880, prio:23, stack:4096
I (390035) wifi: Init static rx buffer num: 10
I (390035) wifi: Init dynamic rx buffer num: 0
I (390035) wifi: Init rx ampdu len mblock:7
I (390045) wifi: Init lldesc rx ampdu entry mblock:4
I (390045) wifi: wifi power manager task: 0x3fff108c prio: 21 stack: 2560
I (390055) wifi: wifi timer task: 3fff11f4, prio:22, stack:3584
W (390065) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration
I (390275) phy: phy_version: 350, Mar 22 2017, 15:02:06, 0, 2
I (390275) wifi: mode : sta (**:**:**:**:**:**)
 => #<ESP32::WiFi:0x3ffe3dcc @on_connected_blk=#<Proc:0x3ffe3de4@(mirb):3>, @on_disconnected_blk=#<Proc:0x3ffe3db4@(mirb):4>>
> I (391005) wifi: n:6 0, o:1 0, ap:255 255, sta:6 0, prof:1
I (391655) wifi: state: init -> auth (b0)
I (391665) wifi: state: auth -> assoc (0)
I (391665) wifi: state: assoc -> run (10)
I (391765) wifi: connected with (acccess point name), channel 6
I (394145) event: ip: 172.20.10.6, mask: 255.255.255.240, gw: 172.20.10.1
Connected 172.20.10.6
I (401665) wifi: pm start, type:0

Windows 10 (1709) WSL

since 2017-11-16

mruby-esp32-app-mirb に再挑戦する。

ssh git@github.com できないと後で git clone mruby-esp32-app-mirb が面倒。

$ ssh -v -T git@github.com

https://github.com/mruby-esp32/mruby-esp32-app-mirb

$ sudo apt-get install build-essentials
$ sudo apt-get install git wget make libncurses-dev flex bison gperf python python-serial
$ sudo apt-get install ruby
$ cd
$ mkdir esp32-setup
$ cd esp32-setup
$ wget --no-check-certificate https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz
$ cd ..
$ mkdir esp
$ cd esp
$ tar -xzf ../esp32-setup/xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz 
$ export PATH=$HOME/esp/xtensa-esp32-elf/bin:$PATH
$ git clone --recursive https://github.com/espressif/esp-idf.git
$ export IDF_PATH=$HOME/esp/esp-idf
$ git clone --recursive https://github.com/mruby-esp32/mruby-esp32-app-mirb.git
$ cd mruby-esp32-app-mirb

上述の "mirb_task", 8192 は 81920 に増やしておく。(必要)

$ tail main/main.c
  mirb_main(1, argv);

  esp_restart();
}

void
app_main()
{
  xTaskCreate(&mirb_task, "mirb_task", 81920, NULL, 5, NULL);
}
$ make menuconfig

# Serial flasher config > Default serial port => /dev/ttyS4 (COM4の場合)
# Component config ---> ESP32-specific
#  > Initialize Task Watchdog Timer on startup => unchecked (なんだか不安定だったので切った)
#  > Event loop task stack size => 40960 (後ろに0をつけて10倍にしたが、こっちは効果不明)
$ make

$ sudo chmod 777 /dev/ttyS4
$ make flash

$ picocom -b 115200 /dev/ttyS4

こんな感じに動く

I (75) boot: Detected ESP32
I (34) boot: ESP-IDF  2nd stage bootloader
I (35) boot: compile time 16:38:48
I (35) boot: Enabling RNG early entropy source...
I (39) boot: SPI Speed      : 40MHz
I (43) boot: SPI Mode       : DIO
I (47) boot: SPI Flash Size : 4MB
I (51) boot: Partition Table:
I (54) boot: ## Label            Usage          Type ST Offset   Length
I (62) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (69) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (77) boot:  2 factory          factory app      00 00 00010000 00100000
I (84) boot: End of partition table
I (88) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x2ac00 (175104) map
I (132) esp_image: segment 1: paddr=0x0003ac28 vaddr=0x3ffb0000 size=0x01684 (  5764) load
I (133) esp_image: segment 2: paddr=0x0003c2b4 vaddr=0x40080000 size=0x00400 (  1024) load
I (138) esp_image: segment 3: paddr=0x0003c6bc vaddr=0x40080400 size=0x03954 ( 14676) load
I (150) esp_image: segment 4: paddr=0x00040018 vaddr=0x400d0018 size=0x559b8 (350648) map
I (225) esp_image: segment 5: paddr=0x000959d8 vaddr=0x40083d54 size=0x03f3c ( 16188) load
I (229) esp_image: segment 6: paddr=0x0009991c vaddr=0x400c0000 size=0x00000 (     0) load
I (233) boot: Loaded app from partition at offset 0x10000
I (238) boot: Disabling RNG early entropy source...
I (243) cpu_start: Pro cpu up.
I (247) cpu_start: Single core mode
I (251) heap_init: Initializing. RAM available for dynamic allocation:
I (258) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (264) heap_init: At 3FFB21F8 len 0002DE08 (183 KiB): DRAM
I (271) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (277) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (283) heap_init: At 40087C90 len 00018370 (96 KiB): IRAM
I (290) cpu_start: Pro cpu start user code
I (9) cpu_start: Starting scheduler on PRO CPU.
mirb - Embeddable Interactive Ruby Shell

ESP32::GPIO

https://github.com/mruby-esp32/mruby-esp32-gpio

ESP32::System

https://github.com/mruby-esp32/mruby-esp32-system

組み込み方

diff --git a/components/mruby/build_config.rb b/components/mruby/build_config.rb
index 2c3d17c..8fb3816 100644
--- a/components/mruby/build_config.rb
+++ b/components/mruby/build_config.rb
@@ -77,5 +77,6 @@ MRuby::CrossBuild.new('esp32') do |conf|
   conf.gem :core => "mruby-compiler"
   conf.gem :core => "mruby-kernel-ext"
   conf.gem :core => "mruby-class-ext"
-
+  conf.gem :github => 'mruby-esp32/mruby-esp32-gpio'
+  conf.gem :github => 'mruby-esp32/mruby-esp32-system'
 end
include ESP32::GPIO
led = GPIO_NUM_2
pinMode(led, OUTPUT)
loop {
  digitalWrite(led, HIGH)
  ESP32::System.delay(1000)
  digitalWrite(led, LOW)
  ESP32::System.delay(1000)
}
mruby.txt · 最終更新: 2017/11/16 17:04 by Takuya Nishimoto

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki